Electric Hammer Drill

Contact me if you have any questions for twist drill bit, step drill bit and wood working drill etc. As the outlook of hammer drill and masonry drill almost the same,many people can not distinguish them. So how to differ from hammer drill and...

 Click for details

Model No. : S-021

Use method and matters needing attention of twist bit 1) the substrate lamination includes the upper and lower plate to be fixed and flattened in a hole and groove positioning system on the drilling table. When using adhesive tape, it is necessary...

 Click for details

Model No. : S-022

Use method and matters needing attention of twist bit 1) Check spindle press foot regularly. Press foot contact surface should be horizontal and vertical with the main shaft can not shake, to prevent drilling and offset hole. 2) The clamping length...

 Click for details

Model No. : S-024

Use method and matters needing attention of twist bit 1) the use of positioning ring CNC machine tools when the depth of the installation positioning must be accurate, such as the use of positioning ring drill installed on the spindle length to...

 Click for details

Model No. : S-025

Use method and matters needing attention of twist bit 1) When in use, the drill should be installed in the spring chuck of the spindle or automatically replaced in the tool bank from the packaging box. 2) check the concentricity of the spindle and...

 Click for details

20 Pcs SDS Plus Chisel Set Hammer Drill Chisel Set 3/8 inch Masonry Concrete Chisel Drill Bits,Including 40mm Wide Chisel, 20mm Flat Chisel, Point Chisel, Gouge Chisel. A chisel is a steel tool with a cutting edge at the end of the handle or handle....

 Click for details

Model No. : BHP-11

Bit is one of the important tools for petroleum drilling, the bit is to adapt to the nature of rock and the quality of good or bad, in the selection of the drilling process plays a very important role, especially the quality of drilling, drilling...

 Click for details

Model No. : BHS 015

"A chisel is a steel tool with a cutting edge at the end of the handle or handle. The chisel is usually held in one hand at right angles to the surface of the object to be carved, and is struck with a mallet held in the other hand. An engraver uses...

 Click for details

Model No. : BHS 014

Usage and classification of drill bits 1, center bit: general this type of bit is used for drilling before the center point, the front cone has 60°, 75°, 90°, etc., in order to use the tail seat support in lathe operations, holding should use 60°...

 Click for details

Model No. : BH 013

The drill bit is the main tool for breaking rock in the drilling process, and the hole is formed by the drill bit breaking rock. How well a well is formed and how long it takes is not only related to the characteristics of the rock being drilled and...

 Click for details

Model No. : BHS 020

"Bit is one of the important tools for petroleum drilling, the bit is to adapt to the nature of rock and the quality of good or bad, in the selection of the drilling process plays a very important role, especially the quality of drilling, drilling...

 Click for details

Model No. : BHP-888

Welcome to us, we are the professional manufacturer of the power tool accessories, we are specialized in drill bits, hole saw, cutting discs etc. We produce various types of the drill bits, Twist drill bits for metal, wood working drill bits,...

 Click for details

When using diamond bits for oil drilling operations, the following aspects need high attention: First, the price of diamond bit is relatively high, so when using should be careful operation, reduce the damage degree; Second, diamond bit has certain...

 Click for details

Welcome to Behappy Crafts, we are the professional manufacturer of power tool accessories, we are specialized in drill bits, hole saw, cutting discs, etc. We produce various types of twsit drill bits, HSS4241, HSS4341, M35, M2, etc for metal...

 Click for details

Welcome to Behappy Crafts, we are the professional manufacturer of power tool accessories, we are specialized in drill bits, hole saw, cutting discs, etc. We produce various types of twsit drill bits, HSS4241, HSS4341, M35, M2, etc for metal...

 Click for details

Model No. : BHD-54

PROFESSIONAL AND WIDELY USE: Compared with percussion drills, electric hammer drills can generate stronger impact force lightly, allowing for effective and precise drilling. Before using the hammer drill, you can use a chisel to make a point of...

 Click for details

Model No. : A09

1. concrete drilling should use impact drilling special twist bit, cutting edge for hard alloy. 2. impact drill depends on rotation and impact to work. A single shock is very slight, but a frequency of more than 40,000 shocks per minute can produce...

 Click for details

Model No. : BH 018

Welcome to Behappy Crafts, we are the professional manufacturer of the power tool accessories, we are specialized in drill bits, hole saw, cutting discs etc. We produce various types of the drill bits, Twist drill bits for metal, wood working drill...

 Click for details

Model No. : S-017

Hi，welcome to our channel. Our company is specialized in most kinds of power tools and power tools accessories.We have our plant for drill bits,hole saw,saw blade etc.At the same time, we supply taps & dies, grinding wheels,labor gloves etc. The...

 Click for details

1. Characteristics and use of cemented carbide drill: (1) Effectively reduce blade breakage, with good wear resistance. (2) Multi-layer geometric cutting edge, improve chip removal performance, keep small cutting resistance. (3) In addition to the...

 Click for details

Welcome to Behappy Crafts, we are the professional manufacturer of power tool accessories, we are specialized in drill bits, hole saw, cutting discs, etc. We produce various types of twsit drill bits, HSS4241, HSS4341, M35, M2, etc for metal...

 Click for details